wholesale costume jewelry fashion accessories
5 thoughts on “wholesale costume jewelry fashion accessories Why does the silver bracelet turn black in one day?”
Leave a Comment
You must be logged in to post a comment.
wholesale costume jewelry fashion accessories
You must be logged in to post a comment.
wholesale fashion jewelry district nyc There are many reasons for the darkening of the silver bracelet. The specific reasons are as follows:
1. The bracelet is a kind of accessories worn on the hand. It will stick to the bracelet, and the sulfur content in sweat is relatively high. These are substances that cause the surface of the silver jewelry to turn black.
2, silver is a lively precious metal. The sulfur and oxide in the air will corrode the silver bracelet to a certain extent. After the silver bracelet is corroded, the oxide will be generated on the surface. After wearing or placing the silver bracelet for a period of time, there will be some tiny black spots or black films. After waiting for a long time, the dark spots and black films on the silver bracelet will slowly spread, and start slowly. The color change, the serious silver bracelet will even turn black, so it is a normal natural phenomenon that the silver bracelet turns black.
The expansion information
The removal method after silver decoration is black:
Onby materials: Coca -Cola, toothpaste, paper towels, towels, soft brushes.
1, soaked with Coca -Cola, because cola contains carbonate to remove silver sulfide, and turns silver sulfide into silver to dissolve the lactic acid in the liquid, so it achieves the effect of removing stains. The soaking time is 12 hours.
2, remove the silver jewelry after soaking.
3, wipe it clean with a clean towel.
4, you can also use toothpaste, squeeze the toothpaste on the soft bristles, and do not use too sharp tools when cleaning with toothpaste, otherwise it will wear the surface of the silverware, which is more likely to oxidize and turn black.
5, apply it on the surface of the silverware, and then wipe it with a soft hair toothbrush or a soft rag until the surface of the silver jewelry is shiny and rinse with water.
6, and finally wipe it with a clean wet towel.
Reference materials Source: Baidu Encyclopedia-Silver Jewelry (Decoration)
downtown la jewelry wholesale Silver is a kind of unstable metal. The oil and fat of the healthy human body can maintain the silver color. When encountering the deposition toxins in the body, or the chemical (such as hair, soap, etc.) in the "sulfur" Whether wearing silver jewelry can effectively maintain the silver color is also a manifestation of good health or not.
Because of the natural characteristics of silver, silver has a good health effect, and often wears toxic substances in the human body. Silver ions have a strong bactericidal effect, which can eliminate 650 germs and can be used as a poisoning tool, which is good for the human body.
If the silver decoration becomes black, at this time, the fine seam of the jewelry brushes should be used, and then the silver milk droplets should be used on the noodle paper. The original light. After that, you must remember to do a good job of daily maintenance to avoid the silver jewelry from turning black again.
Pucting information:
The maintenance of silver jewelry
1. When the silver jewelry is not worn, it should be cleaned before it is well collected. It is best to install it with a closed pocket to prevent oxidation from turning black. If wearer sweats a lot, he can wipe the surface with a soft cloth every day to keep shiny and remove dirt. The silver jewelry of the surface electroplated white is best to use a dedicated silver cloth. The silver cloth can be purchased at the silver jewelry brand.
Note: The silver cloth contains maintenance ingredients and cannot be washed.
2, silver jewelry without electroplating platinum, you can complete it by yourself. For example, squeeze some toothpaste, add some water, wash with a soft cloth, clean the gap with fine hair tooth, and then rinse with water.
3, the variety of craftsmanship of silver jewelry, and the maintenance methods are different. It cannot be generalized. Many maintenance methods on the Internet can only be used as a reference. The silver decoration is damaged.
4, exquisite and three -dimensional silver decorations, avoid deliberately wiking light. If the silver jewelry is found to have a sign of yellowing, you should first use the jewelry to clean the fine seam of the silver jewelry, and then use the silver cloth to gently wipe the surface, so that the silver jewelry can restore the original silver and light.
Reference materials Source: Baidu Encyclopedia-Pure silver jewelry
market street wholesale jewelry wilmington de 1890 There are many reasons for the darkening of the silver bracelet, and the specific reasons are as follows:
1. Because everyone's endocrine and constitution are different, some people have more sweat containing acid, some people are relatively small, and some people's body fluids are more physically liquid. The sulfur content is relatively high. These are substances that cause the surface of the silver jewelry to become black, so everyone wears silver jewelry will produce different results. Some people will be as bright as new for half a year.
2, air and other substances (such as eggs, cosmetics) have certain corrosion effects on silver. The silver jewelry is worn for a long time, and the combination of sulfur and silver will form a layer of black sulfide film on the surface of the silver jewelry, which will begin to show some small spots, and then spread into pieces to form silver scale that people usually call. Become black.
Because of the natural characteristics of silver, silver has a good health effect, and often wears toxic substances in the human body. Silver ions have a strong bactericidal effect, which can eliminate 650 germs and can be used as a poisoning tool, which is good for the human body.
Extended information:
The people like silver jewelry, but they know very little about the maintenance of silver jewelry. Some people even think that silver jewelry is difficult to maintain. In fact, this is not the case. After understanding why the silver jewelry turns black, we only need to spend a little bit of money in daily life to make the silver jewelry we wear for a long time.
1. When the silver jewelry is not worn, it should be cleaned before it should be collected. It is best to install it with a closed pocket to prevent oxidation and black. If wearer sweats a lot, he can wipe the surface with a soft cloth every day to keep shiny and remove dirt. The silver jewelry of the surface electroplated white is best to use a dedicated silver cloth. The silver cloth can be purchased at the silver jewelry brand.
Note: The silver cloth contains maintenance ingredients and cannot be washed.
2, silver jewelry without electroplating platinum, you can complete it by yourself. For example, squeeze some toothpaste, add some water, wash with a soft cloth, clean the gap with fine hair tooth, and then rinse with water.
3, the variety of craftsmanship of silver jewelry, and the maintenance methods are different. It cannot be generalized. Many maintenance methods on the Internet can only be used as a reference. The silver decoration is damaged.
4, exquisite and three -dimensional silver decorations made of sculpture to avoid deliberately wiking light. If the silver jewelry is found to have a sign of yellowing, you should first use the jewelry to clean the fine seam of the silver jewelry, and then use the silver cloth to gently wipe the surface, so that the silver jewelry can restore the original silver and light.
Reference materials Source: Baidu Encyclopedia — Silver Jewelry (Decoration)
tell your tale wholesale jewelry It should be oxidized.
The cause of silver oxidation: silver and silver hydride reactions in silver and air to generate silver sulfide. Silver can also generate silver oxide with oxygen reactions in the air. These are the reactions of silver oxidation.
silver is a chemical element, chemical symbol AG (from Latin Argentum), atomic order 47, a silver -white transition metal. Silver exists in a small amount of free -to -state single -formula in nature, mainly in the existence of silver compound ore. The chemical properties of silver are stable, active, expensive, good thermal conductivity, and good conductivity. It is not easy to be corroded by chemicals, soft, and extensive. Its reflective rate is extremely high, up to 99%.
The method of cleaning silver jewelry:
1. Use Coca -Cola soaking, soaking time for 12 hours.
2. Apply the lipstick to the cloth and then wipe the silver jewelry, and finally rinse with water.
3. Wipe with acetic acid.
4. Soaked with tea separated by night.
5. Wipe with silver cloth.
6. Use silver wash water for one to two minutes.
7. Apply a modified solution on the silver jewelry. Wipe the silver jewelry with cloth before the modified solution is not dry.
8. Wipe with toothpaste and toothbrush.
9. Burning black silver jewelry with a lighter (Note: This method is limited to plain silver (wrapped gold and inlaid silver jewelry cannot be used, the temperature should not be too high, and the use of matches. For silver sulfur), then use the silver cloth to brighten the silver. This method makes the silver jewelry particularly bright.
10. The silver jewelry of the silver is often black. Although it can be cleaned frequently, it is also very troublesome. Prepare a bottle of transparent nail polish before cleaning the silver jewelry. After the cleaning is completed, the silver jewelry is dried with a fan, and then a layer of nail polish is applied to the clean silver jewelry.
osteris wholesale jewelry Silver jewelry turning black is a normal natural phenomenon. Because the sulfur and oxide in other natural media have a certain corrosion effect on silver. After wearing it for a period of time, there will be some tiny spots (sulfurized silver film). It will spread into pieces for a long time and even become black. Maybe you have not found these phenomena before. Therefore, there are currently some silver jewelry have some discoloration due to oxidation. Here are several suggestions:
Penging should strengthen maintenance knowledge: Most consumers know that silver will turn black, but I don’t know how to make it darkened or black. This is where some consumers are unwilling to buy silver jewelry. Therefore, teaching how to maintain and remove the oxides on the surface of the silver jewelry, and restoring the silver decoration is a guarantee for consumers to buy confidence. Mainly the following points:
① Do not wear other precious metal jewelry when wearing silver jewelry to avoid collision deformation or abrasion. ② Avoid contact with water vapor and chemical products, and avoid swimming, especially to the sea.
③ Wipe it clean with a cotton cloth every day and put it in a jewelry box or bag.
④ has been oxidized and darkened. You can wash it with a soft brush with a toothpaste. You can also use your hands to rub soap or detergent. It is really impossible to clean it with silver water washing water. After washing, wipe it with cotton cloth.