jewelry box wholesale distributors How to connect the dual -opening single control switch of the Bulls?

925 jewelry wholesale china The bull's dual -opening single -control switch is as follows:
1, dual -opening dual -control dual -control five -hole panel (back), which are marked with L, N, E, L11, L12, L21.
2, L represents the fire line (red or yellow), n represents the zero line (blue or black), E represents the ground line (safe ground line), E is used for soft lines (dual -color line or black).
3, switch as the power switch of the socket, connect L and L12 with a short red line, L11 in the fire line, nissile line connecting n, and ground wire connecting E.
4, the switch is independent, the switching single controls the light, connects L and L12 with a short red wire, the fire line connects L12 or L, and the zero wire is connected to N. Electric lights are connected to L11, and the negative electrode is connected to the zero line.
5, the switch is independent, connect to L and L21 with a short red line, L1 or L in the fire line, N, and zero line connecting n, and ground wire connecting E. The L11 of the two switches is connected to L21, L12 connects L12, the light is connected to the L21 of the other switch, and the negative electrode is connected to the zero line.
The expansion information:
Pets to use dual -opening single -control switches:
1. The switch socket cannot be installed on the flower piece and waistline of the tiles.
2. When the bottom box of the switch socket is opened in the tile, the border cannot be more than 2mm larger than the bottom box, nor can it be turned into a round hole. In order to ensure that the switch and socket are installed in the future, the bottom box should be equal to the tiles as much as possible, so that there is no need to find a longer screw when installing in the future.
3, the position of the switch socket cannot be destroyed by two or more tiles, and try to make it in the middle of the tile.
4, the opening of the front of the faucet must be turned into a round hole, it cannot be opened into a square hole, and it cannot be opened into a "U" type. The diameter is more than 2mm, and the edge of the water must be flat with the tiles.

wholesale jewelry portland oregon Pay content for time limit to check for freenAnswer hello, wait a momentnHellonI don’t support posting pictures herenQuestion dual -opening single control, how to pick up red and yellow and greennAnswer 1. Dual -control switching line columns are generally marked with "L", "L1", "L2". When L ending into the line, one end of L1 and L2 is connected with L. After pressing the switch, the other end and L of L1 and L2 are connected. 2. Let's peel the channel with oblique tongs first. Be careful not to leave too long heads to avoid touching. 3. We use the L of the left end switch as the fire line input, the L1 and L2 of the two switches correspond to the wiring, and then connect the right switch L to one end of the lighting light, and the other end of the lighting light is connected to the zero line. 4. After connecting the wire, be careful to wrap the line head on both sides of the lighting light with an insulating tape to prevent leakage.n3 morenBleak

wholesale dozen jewelry cheap
n00:00 / 00: 5670% shortcut keys to describe space: Play / suspend ESC: exit full screen ↑: increase volume 10% ↓: reduced volume decrease by 10% →: single fast forward 5 seconds studio Here you can drag no longer appear in the player settings to reopen the small window shortcut key description