5 thoughts on “Win7 system telecommunications broadband how to set up DLKIN wireless router”
Mark
First of all, the wires in the outside are connected on the cat
1. The network cable from the cat is inserted on the WAN mouth of the dlkin router. 2. Use the network cable to connect to the computer from the LAN port of the DLKin router. 3. Set the computer's IP to automatically obtain. 4. Enter 192.168.1.1 in IE and fill in the user name password (the initial default user name password is generally admin) 5. Enter the router page, click the network parameters --- WAN port settings --- -Se select PPPOE ---- Fill in the broadband account password ---- Normal dial --- Select the intermittent automatic connection in the middle ---- save. 6. If you need to use wireless, set up wireless parameters
Bere, please answer for you, please adopt satisfaction, thank you!
1. Connect the wireless router and network cable, and modem. To ensure that the network is unblocked and all indicators are on normally. The mouth of the Wan character on the general router is used in the outer network broadband, and the mouth of the LAN character is used in the local area network. 2. Then turn on the computer's network and sharing center, search for wireless signals, when searching the signal of the wireless router, open the browser, enter the address of the wireless router: 192.168.1.1 (usually this address, different routers, different routers Slightly different, pay attention to the instructions when buying a router), and then enter the user name and password in the prompt box (usually admin, different routers are slightly different, pay attention to the manual). 3. Click on the setting of the setting center at the open configuration center, and then click the next step. 4. After selecting the Internet method, click the next step to enter your broadband or Internet account number and password. Click Next. 5. Set the password of the wireless router so that it can prevent others from "蹭 网". Generally, the password is 6 digits. 6. After the final settings are completed, you need to restart the router to make the setting effective, and you can use the wireless router to access the Internet.
Hello! First set the local connection in your computer to automatically obtain IP, and then enter the background of the router. Generally, 192.168.1.1, the account password you should know, then click to set the wizard, select the link method of the PPPOE (ADSL virtual dial -up) in the next step, and then then, and then You will prompt you to enter the account and password. This account refers to your broadband account. After the input is completed, the next step will be prompted to restart. After the restart, it will be OK! Is to help you wish you good luck! Intersection Intersection
First of all, the wires in the outside are connected on the cat
1. The network cable from the cat is inserted on the WAN mouth of the dlkin router.
2. Use the network cable to connect to the computer from the LAN port of the DLKin router.
3. Set the computer's IP to automatically obtain.
4. Enter 192.168.1.1 in IE and fill in the user name password (the initial default user name password is generally admin)
5. Enter the router page, click the network parameters --- WAN port settings --- -Se select PPPOE ---- Fill in the broadband account password ---- Normal dial --- Select the intermittent automatic connection in the middle ---- save.
6. If you need to use wireless, set up wireless parameters
Bere, please answer for you, please adopt satisfaction, thank you!
1. Connect the wireless router and network cable, and modem. To ensure that the network is unblocked and all indicators are on normally. The mouth of the Wan character on the general router is used in the outer network broadband, and the mouth of the LAN character is used in the local area network.
2. Then turn on the computer's network and sharing center, search for wireless signals, when searching the signal of the wireless router, open the browser, enter the address of the wireless router: 192.168.1.1 (usually this address, different routers, different routers Slightly different, pay attention to the instructions when buying a router), and then enter the user name and password in the prompt box (usually admin, different routers are slightly different, pay attention to the manual).
3. Click on the setting of the setting center at the open configuration center, and then click the next step.
4. After selecting the Internet method, click the next step to enter your broadband or Internet account number and password. Click Next.
5. Set the password of the wireless router so that it can prevent others from "蹭 网". Generally, the password is 6 digits.
6. After the final settings are completed, you need to restart the router to make the setting effective, and you can use the wireless router to access the Internet.
Hello! First set the local connection in your computer to automatically obtain IP, and then enter the background of the router. Generally, 192.168.1.1, the account password you should know, then click to set the wizard, select the link method of the PPPOE (ADSL virtual dial -up) in the next step, and then then, and then You will prompt you to enter the account and password. This account refers to your broadband account. After the input is completed, the next step will be prompted to restart. After the restart, it will be OK!
Is to help you wish you good luck! Intersection Intersection
Entry 192.168.1.1 Settings
Like XP